3D PRINTED MODEL

This product has been produced using a Bambu Lab X1-Carbon Combo 3D printer. This is not a molded or machined part, and therefore may contain minor cosmetic imperfections.

You may purchase this printed item from our website, or you may download the FREE STL file and print the item on your own 3D printer. NOTE: Please refer to the license agreement below before you download the STL file.

Compatible with the standard Field Notes memo books (3-1/2" x 5-1/2"), this storage cabinet is a convenient and fun way to organize and store all of your new and archived memo books. The cabinet is extremely robust, and can storeup to ten memo books. The front cover panel flips up, then slides back into the cabinet for easy insertion or removal of the books. In addition, each cabinet contains 2 embedded magnets on each of the four sides (left, right, top and bottom), allowing you to join adjacent cabinets on any side to create a storage array to suit your needs!

You can either choose the complete cabinet with the cover panel color of your choice, or you can purchase only the cover panel if you wish to change things up with a new color for a cabinet you previously purchased.

What you get:

• (1) Field Notes Storage Cabinet (Field Notes memo books not included)
• Black Cabinet
• Front cover panel in your choice of color
• Pre-installed magnets

OR:

• (1) Cover panel in your choice of color

PLEASE NOTE: Due to the lengthy print time of these items, large orders may result in a minor delay prior to shipping.

This work is licensed under a .

Specifications

The Field Notes Storage Cabinet comes in your choice of 6 cover panel colors, and can accommodate the standard Field Notes memo book size of 3-1/2" x 5-1/2".

• Case Material: PLA
• Width: 126.00 mm [4.96"]
• Height: 172.40 mm [6.79"]
• Depth (enclosure): 103.00 mm [4.06"]
• Depth (with cover knob): 118.60 mm [4.67"]
• Weight: 424 grams [16.7 oz]

3D Printing

We would like to provide some helpful tips on this particular product which will make it easier for you to print these models successfully if you choose to print them on your own printer. The following information refers to the settings we use when printing, however feel free to use whatever setting you are comfortable with to get a successful print on your specific printer:

CABINET:

• The printed cabinet consumes over 350 grams of filament
• These are printed with 3 walls, 10% infill
• Print the part facing up, with the back wall of the cabinet sitting on the build plate. No supports are required.
• The cabinet is designed to use 1/4" diameter x 1/4" long N48 neodymium magnets. As a courtesy to our customers, we do offer these magnets in a set of 8 on our site .
• The magnet holes should provide a light press-fit with the magnets, no glue is required. You may want to use a large right angle Allen wrench or similar to install them.
• Magnet polarity is critical to ensure all the cabinets connect to one another. We install them so that the "North" pole is facing outward on the top and left sides, and the "South" pole is facing outward on the right and bottom sides. If you do not have a means to test the polarity of the magnets, just make sure you install them so that adjacent cabinets will connect to each other by testing the magnet orientation before installation.
• You can find inexpensive magnet polarity testers on Amazon for approximately $12.00 USD

COVER PANEL:

• The printed cover panel consumes approximately 60 grams of filament
• These are printed with 3 walls, 15% infill
• Orient the cover panel so that the hole for the knob is facing down on the build plate. No supports are required.
• You can print the cover panel and the knob at the same time.
• The knob must be inserted into the star-shaped hole in the cover panel. It requires a press-fit and will take a fair amount of force to insert the knob. Make sure the tip of the knob (the part that is inserted into the hole) does not have any excess filament, or it may prevent the knob from inserting completely into the hole. Running the top surface across a sheet of sandpaper can easily remove any excess filament. You may also want to place a very small drop of super glue gel on the tip of the knob before inserting it into the hole to ensure it will never inadvertently pop out. Although this is not likely to happen, constant use of pulling on the knob may eventually work it loose.
• To install the cover panel into the cabinet, simply squeeze the flexures on the sides at the top, and insert the ends into the slots at the top of the cabinet

File Download

PLEASE NOTE: we offer the print files under the condition that you understand the basics of 3D printing and how to print the models on your specific printer. The parts for this product can be printed without supports, however we will not offer advice on print settings, filament, or any related requirements. However we do offer printing tips on this particular product, please refer to the "3D Printing" tab above.

Download the 3D model STL file

This work is licensed under a .